MFP & Display Support

Sharp MFPs running OSA® 4.0 or greater and supporting TLS 1.2 can be used with Synappx Go tags for scan, print release, and print cloud files*. Later models have built-in NFC tags that can be used. However, MFP NFC configuration may be required if not already set up.

Models shown in bold text with OSA 5.5 can support the Synappx Go copy feature and optional integration with the rf IDEAS reader for PaperCut MF and Native Authentication use. The rf IDEAS integration requires installation of Synappx Go 1.0.0.emo file in the following MFP models.

* Products may require additional connectivity option or firmware upgrade for full compatibility.


BP-30C25	MX-2651	MX-3051	MX-3551
MX-4051	MX-5051	MX-6051	MX-3061
MX-3561	MX-4061	MX-3071	MX-3571
MX-4071	MX-5071	MX-6071	MX-3061S
MX-3561S	MX-4061S	MX-3071S	MX-3571S
MX-4071S	MX-6071S	MX-7081	MX-8081
MX-7090N	MX-8090N	BP-50C26	BP-50C31
BP-50C36	BP-50C45	BP-50C55	BP-50C65
BP-55C26	BP-60C31	BP-60C36	BP-60C45
BP-70C31	BP-70C36	BP-70C45	BP-70C55
BP-70C65


BP-30M28	BP-30M31	BP-30M35	MX-M2651
MX-M3051	MX-M3551	MX-M4051	MX-M5051
MX-M6051	MX-M3071	MX-M3571	MX-M4071
MX-M5071	MX-M6071	MX-M3071S	MX-M3571S
MX-M4071S	MX-M5071S	MX-M6071S	MX-M6570
MX-M7570	MX-M905	MX-M1055	MX-M1205
MX-M1056	MX-M1206	BP-50M26	BP-50M31
BP-50M36	BP-50M45	BP-50M55	BP-50M65
BP-70M31	BP-70M36	BP-70M45	BP-70M55
BP-70M65	BP-70M75	BP-70M90


MX-C303W	MX-C304W	MX-C303WH	MX-C304WH
MX-C357F	MX-C407F	MX-C507F	MX-C557F
MX-C607F	MX-C407P	MX-C507P	MX-C607P


MX-B355W	MX-B455W	MX-B356W	MX-B456W
MX-B356WH	MX-B456WH	MX-B427FW	MX-B467F
MX-B557F	MX-B707F	MX-B427PW	MX-B467P
MX-B557P	MX-B707P

Notes:

If using built-in NFC tags, modify the following MFP web page settings:
- Network Connections > Easy Connections Setting: Enable NFC tag
- Network Settings > Quick Settings > Wireless Settings: Set Connection Type to either Wireless (Infrastructure Mode) or Wired + Wireless (Access Point Mode)
There are no MFP web page network setting changes for external NFC tags.
For information on early model compatibility, contact your reseller or Sharp representative.

Configure MFP Web Page for Copy

To use Synappx Go for copying on a supported MFP, check the following MFP web page settings.

Go to System Settings > Sharp OSA Settings > Condition Settings on the MFP web page.
The following items must be checked:
- Accept remote access request from application.
- Accept UI operation request from application.
All other items on the Condition Settings page must be unchecked, including:
- Approve remote access request on operation panel.
- Display dialog of connection in Sharp OSA mode.
- Accept secondary send request from Sharp OSA application.

Display Support

Any interactive display with a Shuttle® PC or another PC system running Microsoft® Windows 10 or greater or Windows Server® 2016 or 2019 and with the minimum system configuration can be used with the Synappx Go display agent. System on Chip (SOC) models without a Shuttle PC are not supported at this time.