Hardware Installations

Set Up Casting Device

Note: MirrorOP for Sharp Client Sender Application

Synappx Meeting no longer supports the MirrorOp for Sharp client sender application. Switch the casting/mirroring environment from MirrorOp for Sharp to Barco's MirrorOp. Barco's MirrorOp is downloadable at no cost to Synappx users. Download MirrorOp from Barco.

Set Up Casting Devices (wePresent or Embedded Display Wireless Interface)

  1. Connect the casting device to a display.
  2. Connect the casting device to LAN.
  3. Open the casting device webpage and configure the IP address and PIN code (the static IP address is required for the wePresent/wireless network card). You can access the device web page by connecting a cable to the casting device or network interface from a PC.
  4. Filtering (Gatekeeper) settings should be set to All pass or Internet only. [View Image]

 

MirrorOp Client Sender Software

MirrorOp is a sender application for the casting device (wePresent and wireless Sharp displays).

  • Install MirrorOp application on the client/users’ PCs.
  • In a mixed environment, install both MirrorOp applications on the client PC.

The Synappx Meeting client application automatically connects to the casting device via MirrorOp when the meeting is started.

 

MirrorOp Software

  • MirrorOp from Barco (for wePresent external device) (Recommended)
    The PIN number is always asked with this type of MirrorOp software.

Be sure to install the correct version to ensure full functionality of the software and the display.

Previous